How to Use Brother Computerized Sewing Machine: A Practical Guide (2026)
Learn how to use a Brother computerized sewing machine, from threading and bobbin setup to choosing stitches and sewing your first seam. Follow these steps.
Updated November 2026
Learning how to use a Brother computerized sewing machine comes down to four things: winding and inserting the bobbin, threading the upper path, choosing a stitch, and setting the fabric and presser foot correctly. Once you have done these steps a few times, the machine handles most of the work on its own. This guide walks through each stage in the order you will actually need it.
Set Up the Machine and Wind the Bobbin
Place the machine on a flat, stable surface and plug it in before you turn it on. Most Brother computerized models have a bobbin winder that runs from the spool pin, so set your thread on the spool pin with the cap or felt washer in place. Guide the thread through the bobbin winder tension guide, wind a few turns onto an empty bobbin, and press the winder arm toward the bobbin to engage it. Stop the winder when the bobbin is full, then cut the thread and return the arm to its resting position.
Shopping for one? See our guide: 6 Best Computerized Sewing Machine Brother Models for Every Need (2026).
Thread the Upper Path and Insert the Bobbin
Raise the presser foot before threading so the tension discs open. Follow the numbered or color-coded guides printed on the machine, passing the thread through the thread guide, the take-up lever, and down to the needle. Most Brother models include a built-in needle threader; lower the needle to its highest position, engage the threader, and draw the loop through the eye. Pull about 4 to 6 inches of thread out behind the needle before you start sewing.
To insert the bobbin, open the front or top bobbin cover, place the bobbin in its case so the thread unwinds in the direction shown on the diagram, and pull the thread into the slot that puts tension on it. Close the cover, then bring up the bobbin thread by turning the handwheel toward you one full rotation while holding the upper thread gently.
Select a Stitch and Set the Fabric
Use the stitch selector dial or touchscreen to pick your stitch. Straight stitch is the default for most seams. Zigzag handles stretch fabrics and edge finishing, and buttonhole and decorative stitches are available on most computerized models. Once you have chosen a stitch, attach the correct presser foot: a standard foot for general sewing, a zipper foot for zippers, and a buttonhole foot for buttonholes. Place the fabric under the foot, lower the presser foot, and sew a test swatch of the same fabric before you start on your project.
- Set the stitch length (usually 2.5 mm for general sewing) and width if you are using zigzag.
- Lower the needle into the fabric, then lower the presser foot.
- Press the start/stop button or use the foot pedal, and guide the fabric gently without pulling.
- Backstitch at the beginning and end of a seam, then raise the presser foot and cut the threads.
Adjust Tension and Check Your Stitches
Computerized Brother machines set tension automatically for most fabrics, but the automatic setting does not always suit every project. Check the underside of your test swatch. Ideally, the upper and bobbin threads interlock in the middle of the fabric layers. If the bottom thread shows on top, the upper tension may be too tight. If the top thread shows on the back, the upper tension may be too loose. Make small changes with the tension dial or on-screen control and test again before sewing your final piece.
Common Mistakes to Avoid
- Forgetting to raise the presser foot before threading, which keeps the tension discs closed and causes loops.
- Using a bent or dull needle, which can skip stitches or damage fabric.
- Skipping the test swatch, which hides tension problems until you are halfway through a project.
- Pulling or pushing the fabric as you sew, which can bend the needle and shift the seam.
- Leaving lint in the bobbin area, which affects tension and stitch quality over time.
Recommended Gear
- Brother Universal Needle Assortment: Helps you match needle size to fabric weight so stitches stay even. View on Amazon
- Brother bobbins for computerized models: Bobbins made for your model give consistent tension and avoid winding problems. View on Amazon
- Brother presser feet set: Zipper, buttonhole and other specialty feet let you sew a wider range of projects without guesswork. View on Amazon
FAQ
How do you use a Brother computerized sewing machine for the first time?
Start by winding the bobbin, threading the upper path with the presser foot raised, and inserting the bobbin. Then select a straight stitch, sew a test swatch, and check the stitches on both sides before beginning your project.
Why does my Brother sewing machine skip stitches?
Skipped stitches are most often caused by a bent or dull needle, the wrong needle type for your fabric, or incorrect threading. Replace the needle first, then rethread the machine with the presser foot raised.
Do I need to adjust tension on a computerized Brother machine?
Usually no, because the machine sets tension automatically for most fabrics. Adjust it only if your test swatch shows thread showing on the wrong side, and make small changes at a time.
Conclusion
Once you know how to wind the bobbin, thread the upper path, and choose a stitch, a Brother computerized sewing machine becomes straightforward to operate. Practice on scrap fabric to learn how your machine responds to different materials. For more detail on your specific model, check the owner’s manual that came with your machine.
Related reading
- Brother SE-270D Computerized Sewing Machine: A Practical Setup and Use Guide
- Xr9550 Computerized Sewing Machine: Setup, Features and Use Guide (2026)
- What Is a Computerized Sewing Machine? Definition and How It Works
- Janome Computerized Sewing Machine DC2013 Price: What to Expect and How to Shop
- Elna Computerized Sewing Machine: Why Stitches Skip and How to Fix Them
- Computerized Sewing Machine Automatic Tension: How It Works and How to Adjust It
Ready to choose one?
