Singer SP68 Computerized Sewing Machine: A Practical Guide (2026)
Learn how to set up, thread, and use the Singer SP68 computerized sewing machine, with fabric-matching tips, common mistakes to avoid, and a quick FAQ.
Updated November 2026
The Singer SP68 computerized sewing machine is a compact, beginner-friendly machine built around a set of built-in stitches and a simple control layout. This guide walks you through setup, threading, stitch selection, and tension checks so you can sew clean seams on everyday fabrics. Follow the steps in order the first time, and you will have a reliable starting routine you can repeat for every project.
Set Up the Machine Before You Sew
Place the machine on a flat, stable surface with room behind it for fabric to feed freely. Plug in the foot control and power cord, then raise the presser foot and confirm that the bobbin area is clean. Lint buildup under the bobbin case is one of the most common causes of skipped stitches, so brush it out before every session.
Shopping for one? See our guide: 7 Best Computerized Sewing Machine Singer Models for 2026.
Thread the Upper Thread and Bobbin Correctly
Most owners find that threading errors cause more trouble than any mechanical fault. Work through the upper threading path in the order marked on the machine, keeping the presser foot raised so the tension discs open. Wind the bobbin with light, even tension, and seat it in the case so the thread feeds in the direction the machine’s diagram shows.
- Raise the needle to its highest position using the handwheel.
- Place the spool on the spool pin and guide the thread through each guide and the take-up lever.
- Thread the needle from front to back, or use the built-in threader if your model includes one.
- Pull out about 4 inches of thread and hold it lightly while you stitch the first few inches.
Choose Stitches and Adjust Tension for Your Fabric
Select a stitch with the stitch dial or keypad, then test it on scrap fabric layered the same way as your project. Medium-weight cotton with a standard straight stitch is the best starting point. Check the stitch from both sides: the upper thread should lie flat on the top, and the bobbin thread should not show as a line on the underside. If one side pulls, adjust the tension in small increments rather than making large changes.
| Fabric type | Needle to start with | Tension note |
|---|---|---|
| Quilting cotton | Size 80/12 universal | Standard setting; test on scrap |
| Knit jersey | Size 75/11 ballpoint | Use a stretch stitch to prevent popping |
| Denim or canvas | Size 90/14 jeans needle | Slightly longer stitch length |
Before you change any setting, review the fundamentals in What Is a Computerized Sewing Machine? Definition and How It Works so you understand how the stitch selection system and automatic functions interact. If you are still deciding whether this model suits your work, Singer or Brother Sewing Machine for Beginner: 7 Best Picks (2026) compares it with a common alternative.
Sew a Test Seam and Check the Results
Sew a straight seam about 8 inches long on two layers of your fabric, then press it open. Look for even stitches, no bunching on the top or bottom, and a seam that lies flat. Adjust the presser foot pressure only if fabric is feeding unevenly, and always lower the foot before testing. Repeat the test whenever you switch fabric weights or thread brands.
Common mistakes
- Forgetting to raise the presser foot when threading, which keeps the tension discs closed.
- Using a bent or dull needle, which causes skipped stitches and thread breaks.
- Skipping cleaning, so lint collects around the bobbin case and feed dogs.
- Changing several settings at once, which makes it hard to find the cause of a problem.
- Sewing stretch fabric with a straight stitch, which causes seams to pop when worn.
Recommended gear
A fresh supply of universal and ballpoint needles lets you match needle type to each fabric in this guide. View on Amazon
A lint brush designed for sewing machines makes it easy to clean the bobbin area after every project. View on Amazon
Extra bobbins matched to your machine let you pre-wind thread for the next project without interrupting your work. View on Amazon
FAQ
Why does my Singer SP68 skip stitches?
Skipped stitches most often come from a bent or dull needle, incorrect threading, or lint in the bobbin area. Replace the needle first, then re-thread with the presser foot raised and clean the bobbin case.
Can I use the SP68 for stretch fabric?
Yes, but choose a stretch or zigzag stitch and a ballpoint needle designed for knits. A straight stitch on stretch fabric will break when the seam is stretched.
How often should I clean the machine?
Clean the bobbin area after each project and oil the machine according to the manufacturer’s manual. Heavy sewing or fuzzy fabrics like flannel call for more frequent cleaning.
Conclusion
Setting up, threading, and testing your Singer SP68 in the same order each time will prevent most common problems. Match your needle and tension to the fabric, and keep the bobbin area clean. With those habits in place, the machine becomes a dependable tool for everyday sewing.
Related reading
- Singer Stylist 7258 Computerized Sewing Machine: A Practical Guide (2026)
- Singer Quantum Stylist 9960 Computerized Sewing Machine: A Practical Guide (2026)
- Singer Heavy Duty 6800c Computerized Sewing Machine: A Practical Guide (2026)
Ready to choose one?
