We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Singer One Plus Computerized Sewing Machine: A Practical Guide for Beginners

Learn how to set up, thread, and use a Singer One Plus computerized sewing machine, with tips on stitch selection, tension, and common beginner mistakes.

Updated November 2026

The Singer One Plus computerized sewing machine is a beginner-friendly model that handles everyday sewing with built-in stitch presets and a simple control layout. This guide walks you through setup, threading, stitch selection, and basic tension adjustment so you can sew your first clean seam with confidence. Expect to finish with a machine that is threaded correctly and ready for a test piece.

Set Up the Machine Before Your First Seam

Place the machine on a flat, stable table with clear space behind it so the fabric can move freely. Plug it in, turn on the power, and check that the presser foot is down before you begin. Install the needle with the flat side facing the back of the machine, pushing it up as far as it will go, then tighten the clamp screw firmly.

Shopping for one? See our guide: 7 Best Singer One Computerized Sewing Machines for Sale in 2026.

Thread the Top and Bobbin Correctly

Most threading mistakes come from skipping a guide. Raise the needle to its highest position, place the spool on the spool pin, and follow the numbered path shown on the machine body. Pull the thread through the take-up lever before passing it through the needle from front to back. For the bobbin, wind thread evenly, insert the bobbin so it unwinds counterclockwise, and bring the thread up through the throat plate slot.

Choose Stitches and Adjust Tension

Use the stitch selector to pick a straight stitch for seams and a zigzag stitch for finishing raw edges or stretch fabrics. Set stitch length around 2.5 mm for general sewing and shorten it for fine fabrics. Test on a scrap of the same fabric before you sew your project.

If the top thread shows on the underside of your fabric, the upper tension is too tight. If loops appear on top, the upper tension is too loose. Adjust in small increments, usually one number at a time, and sew another test line after each change. Keep the bobbin tension at its default setting unless you have a clear reason to change it.

A Quick Setup Checklist

  1. Install a needle suited to your fabric and insert it fully.
  2. Thread the upper path following the numbered guides.
  3. Wind and insert the bobbin, then bring up the bobbin thread.
  4. Select a stitch and set the stitch length.
  5. Sew a test line on scrap fabric and check the tension.

Match Needle and Thread to Your Fabric

Needle size matters as much as stitch choice. Lightweight woven cottons usually sew well with a size 70/10 or 75/11 needle, while denim and canvas call for a heavier size 90/14 or 100/16. Knits need a ballpoint needle so the fibers are not damaged. Use all-purpose polyester thread for most projects, and match thread weight to the fabric weight.

Common Mistakes

  • Sewing with a bent or dull needle, which causes skipped stitches.
  • Threading the machine with the presser foot raised, which prevents tension from engaging.
  • Forgetting to raise the presser foot when removing fabric.
  • Changing several tension settings at once instead of one at a time.
  • Skipping a test seam on scrap fabric before starting a real project.

A fresh assortment of universal and ballpoint needles lets you switch quickly between woven and knit fabrics without guessing. View on Amazon

A seam ripper with a fine tip makes it easy to correct tension problems without damaging your fabric. View on Amazon

Polyester all-purpose thread in a neutral color covers most sewing needs and works well with the stitch settings on this machine. View on Amazon

FAQ

Is the Singer One Plus suitable for complete beginners?

Yes. Its guided threading path and preset stitch selection make it approachable for people who are new to sewing. Practicing on scrap fabric first helps you learn how the controls respond.

Why does my stitch look uneven on the top of the fabric?

Uneven stitches usually point to upper tension, a dull or incorrect needle, or thread that was not seated in the tension discs. Rethread the top path with the presser foot raised, then sew a test line and adjust tension one step at a time.

What should I do if the machine skips stitches?

Stop and replace the needle first, since a bent or dull needle is the most frequent cause. Confirm the needle is inserted fully with the flat side facing the back, then check the threading path.

Conclusion

Once you have set up the machine, threaded the top and bobbin correctly, and tested your tension, the Singer One Plus is ready for everyday projects. Keep a scrap of your project fabric nearby for test seams, and change one setting at a time. If problems persist, consult the manual or a qualified sewing machine technician.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our sewing supplies guides, checking product details against manufacturer specifications and owner feedback.

About the author

Emily Parker
Emily Parker

Emily Parker writes reviews and buying guides for Sewing Thread Online.