Brother 100 Stitch Computerized Sewing Machine CE1008: Setup and Stitch Guide
Learn how to set up, thread, and choose stitches on the Brother 100 stitch computerized sewing machine CE1008, with practical tips for beginners.
Updated November 2026
The Brother 100 stitch computerized sewing machine CE1008 is built for sewers who want a wide stitch range without a steep learning curve. In this guide, you will set up the machine, thread it correctly, pick the right stitch for your fabric, and avoid the errors that cause most beginner frustration.
Set Up the CE1008 Before You Sew
Place the machine on a stable, flat surface with enough clearance on the left for fabric to drape. Plug in the foot control and power cord, then raise the presser foot before you turn the machine on. Attach the correct presser foot for your work; the all-purpose foot is the usual starting point for general seams.
Shopping for one? See our guide: 4 Best Brother 60 Stitch Computerized Sewing Machines for Beginners (2026).
Next, wind a bobbin. Place the spool on the spool pin with the thread running in the direction the machine indicates, guide the thread around the bobbin winder tension disc, and wind until the bobbin is full. Seat the bobbin in its case so the thread feeds in the direction shown on the case, then pull the thread through the slot to engage the tension spring.
Thread the Upper Thread Path
Raise the needle to its highest position and lift the presser foot. Follow the numbered or color-coded threading path from the spool pin through the guides, tension dial, take-up lever, and down to the needle. Thread the needle from front to back, then pull about 4 inches of thread through to the back for easier starting.
- Turn the handwheel toward you until the take-up lever reaches its top position.
- Pull the upper thread gently and confirm it sits in every guide.
- Bring the bobbin thread up through the throat plate and hold both tails while you take the first few stitches.
Choose the Right Stitch for Your Project
The CE1008 offers 100 stitches, including utility stitches, decorative stitches, and buttonholes. Select a stitch with the stitch dial or LCD keypad, then check the stitch width and length settings. Use a straight or zigzag stitch for seams and hems, a narrow zigzag or overlock-style stitch for knit fabrics, and decorative stitches only for finishing edges where you can test first.
| Fabric type | Suggested stitch | Needle guidance |
|---|---|---|
| Woven cotton or linen | Straight stitch, 2.5 mm length | Universal needle, size 80/12 |
| Knit jersey | Narrow zigzag or stretch stitch | Ballpoint or stretch needle |
| Denim or canvas | Straight stitch, slightly longer | Heavy-duty needle, size 100/16 |
For more on how individual stitches behave, see Brother Computerized Sewing Machine 100 Stitch: A Setup and Buying Guide and How to Use Brother Computerized Sewing Machine: A Practical Guide (2026).
Test Stitches on Scrap Fabric
Before you stitch a finished piece, sew a sample on a scrap of the same fabric, layered the same way. Check tension, puckering, and stitch length. Adjust the tension dial in small steps, usually one number at a time, and sew another sample after each change.
Recommended Gear
A sharp needle matched to your fabric makes the biggest difference in stitch quality, so keep a range of sizes on hand. A basic presser foot set also expands what the machine can do without buying a separate machine. Finally, a bobbin box helps you keep prewound bobbins organized by thread color.
- Universal sewing machine needle assortment: keeps a size for every weight of fabric. View on Amazon
- Brother sewing machine presser foot set: offers specialty feet for zipper, buttonhole, and rolled hems. View on Amazon
- Plastic bobbin storage box: keeps prewound bobbins sorted and easy to find. View on Amazon
Common Mistakes to Avoid
- Threading with the presser foot down, which keeps the tension discs from opening and causes loops.
- Using a dull or bent needle, which often causes skipped stitches.
- Forgetting to change the needle after a project with heavy fabric.
- Pulling fabric through the machine instead of guiding it, which bends the needle.
- Skipping the test sample when switching to a new fabric or thread weight.
FAQ
How do I know which needle to use with the CE1008?
Match the needle to the fabric: universal needles suit most woven cottons, ballpoint or stretch needles suit knits, and heavy-duty needles suit denim and canvas. Check the needle package or the machine manual for the recommended size range.
Why does my top thread keep breaking?
The most common causes are incorrect threading, a damaged needle, or tension set too high. Rethread with the presser foot raised, replace the needle, and reduce the tension one step at a time while testing on scrap fabric.
Can I use decorative stitches on any fabric?
Decorative stitches work best on stable fabrics such as cotton and denim. On stretchy or delicate fabric, test first and use a stabilizer underneath to prevent puckering.
Conclusion
Setting up the Brother 100 stitch computerized sewing machine CE1008 comes down to a few steps done in order: prepare the machine, thread both threads correctly, and match the stitch to the fabric. Test on scrap every time you change a setting. With those habits in place, the machine’s 100-stitch range becomes a practical tool rather than an overwhelming menu.
Related reading
- Brother Cp60x 60 Stitch Computerized Sewing Machine: A Practical Guide (2026)
- Brother Cp2160w 60-stitch Computerized Sewing Machine: Setup and Beginner Guide
Ready to choose one?
