We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Spiegel 350 Stitch Computerized Sewing Machine: A Beginner’s Setup Guide

Learn how to set up, thread and use a spiegel 350 stitch computerized sewing machine, with practical steps, tips and common mistakes to avoid.

Updated November 2026

This guide walks you through setting up a spiegel 350 stitch computerized sewing machine, threading it correctly, and selecting and sewing your first stitches. By the end, you will know how to get clean, balanced seams and how to troubleshoot the problems beginners run into most often. Always check the manufacturer’s manual for your exact model, since stitch layouts and menu names vary between machines.

Unpack and Place the Machine Correctly

Set the machine on a flat, stable table with enough room on both sides for fabric to move freely. Keep it away from direct drafts and place the power cord where you won’t catch it with your knee. Remove the accessory box, the foot control and any transport screws or packing foam before you plug anything in.

Shopping for one? See our guide: 4 Best Brother 60 Stitch Computerized Sewing Machines for Beginners (2026).

Attach the foot control and connect the power cord, then turn the machine on and let the display finish its startup sequence. Confirm the machine is set to the basic straight stitch before going further.

Thread the Upper Thread and Bobbin

Threading order matters more than most beginners expect. Raise the needle to its highest position, lift the presser foot, and follow the numbered or color-coded path printed on the machine. Pull the thread through the tension discs firmly, guide it down through the take-up lever, and thread the needle from front to back.

For the bobbin, wind thread evenly by hand or on the bobbin winder, then drop the bobbin into the case so the thread pulls off in the same direction the manual shows. Bring the bobbin thread up through the throat plate and hold both tails before you start sewing.

Thread Checklist

  1. Raise the needle to its highest point.
  2. Place the spool on the spool pin with the correct cap and felt pad.
  3. Follow the numbered threading path on the machine body.
  4. Thread the needle from front to back and pull out about 4 inches of tail.
  5. Wind and insert the bobbin, then bring up the bobbin thread.

Choose Stitches and Set Tension

A machine with a 350-stitch library includes utility stitches, decorative patterns, alphabets and buttonholes. Start with the stitches you will actually use: straight stitch, zigzag, and a buttonhole. Select a stitch on the display, then check the presser foot the machine recommends for it, since this changes with the stitch type.

Begin with the default tension setting and sew a test strip using two layers of the same fabric you plan to use. Look at the top and bottom of the seam. If the top thread shows on the underside, the upper tension is too tight. If loops appear on top, the upper tension is too loose or the bobbin is threaded incorrectly.

Stitch Length and Width

For general sewing on medium-weight woven cotton, a straight stitch length around 2.5 mm is a common starting point. Adjust width for zigzag and decorative stitches in small increments, testing each change on scrap fabric before sewing your project.

Sew a Practice Sample

Practice on scrap fabric cut to the same weight and fiber as your project. Sew straight lines at a steady pace, using the foot control to build speed gradually. Keep your hands light on the fabric and let the feed dogs do the work. Once your straight seams are even, try a zigzag edge, then a buttonhole on a scrap piece, checking each result against the manual.

Common Mistakes

  • Forgetting to raise the presser foot before threading, which prevents the tension discs from engaging.
  • Inserting the bobbin backward, causing tension problems that look like machine faults.
  • Using a dull or wrong-size needle for the fabric, which can skip stitches or cause puckering.
  • Pulling the fabric through the machine instead of guiding it, which bends the needle.
  • Changing several settings at once, making it hard to know which change caused a problem.

A supply of universal machine needles in several sizes lets you match the needle to lightweight cotton, denim or knits without guessing. Keep it in your sewing kit for quick swaps.

View on Amazon

A fabric marking pen or tailor’s chalk helps you transfer guide lines accurately before you sew practice seams, which speeds up learning the stitch layouts.

View on Amazon

FAQ

Why does my spiegel 350 stitch computerized sewing machine skip stitches?

Skipped stitches are usually caused by a bent, dull or incorrectly sized needle, or by a needle that was inserted with the flat side facing the wrong way. Replace the needle with one suited to your fabric and reinsert it fully until it stops.

How do I know which presser foot to use?

The machine display or manual typically recommends a foot for each stitch. Use the general-purpose foot for straight and zigzag stitches, and switch to the specified foot for buttonholes and decorative stitches.

Can I sew thick fabrics like denim on this machine?

Many computerized machines handle denim in a single layer with a heavier needle and a slightly longer stitch. For multiple layers or very heavy fabric, test on scrap first and consult your manual’s fabric guidance.

Conclusion

With the machine set up, correctly threaded and tested on scrap, you can sew reliable straight seams and build from there to decorative stitches. Keep a log of settings that work for each fabric, and refer back to your manual whenever a stitch behaves unexpectedly. Practice on scrap regularly, and your results will improve quickly.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our sewing supplies guides, checking product details against manufacturer specifications and owner feedback.

About the author

Emily Parker
Emily Parker

Emily Parker writes reviews and buying guides for Sewing Thread Online.