We research and compare products using published specifications, features and owner feedback. When you buy through our links, we may earn a commission. As an Amazon Associate I earn from qualifying purchases. Learn more›

Brother Xs2100 Computerized Sewing Machine: Setup, Stitches and Beginner Tips

Learn how to set up, thread and use the brother xs2100 computerized sewing machine, with stitch selection tips, common mistakes and answers to beginner question

Updated November 2026

The brother xs2100 computerized sewing machine is a beginner-friendly machine built around a clear stitch selection dial and an automatic threader. This guide walks you through unpacking and setup, threading the upper and lower lines, choosing stitches for common fabrics, and avoiding the errors new owners run into most. By the end, you should be able to sew a straight, even seam on scrap fabric and know where to adjust tension if something looks off.

Set Up the Machine Before Your First Stitch

Place the machine on a flat, stable surface with the free arm clear of obstructions. Plug in the foot control, insert the cord into the back of the machine, and switch on the power before doing anything else. Raise the presser foot and confirm the foot lifter moves freely.

Shopping for one? See our guide: 6 Best Computerized Sewing Machine Brother Models for Every Need (2026).

  1. Attach the correct presser foot. The all-purpose foot is the default for most fabrics.
  2. Insert a needle with the flat side facing the back of the machine. Push it up until it stops, then tighten the clamp screw.
  3. Check that the bobbin you plan to use is wound evenly and seated in the bobbin case in the correct direction.
  4. Set the stitch length and width to their default values, then sew a few inches of test stitching on scrap fabric.

Thread the Upper and Lower Lines Correctly

Most threading problems come from skipping a step in the thread path. Raise the needle to its highest position first, then follow the numbered guides on the machine body in order. Pull the thread through the take-up lever, then down through the needle guide and into the eye of the needle from front to back.

The lower thread is drawn up through the throat plate by the bobbin thread. Hold the top thread gently as you turn the handwheel one full rotation toward you. A loop of bobbin thread should appear. Pull both tails to the back under the presser foot before starting to sew, so the first stitches do not jam.

Choose Stitches and Settings for Your Fabric

The stitch selection dial lets you switch between straight, zigzag and decorative stitches. For woven cotton and quilting weights, a straight stitch at a length of about 2.5 mm is a practical starting point. For knits, switch to a stretch or zigzag stitch so seams can flex without popping.

Fabric Needle suggestion Stitch setting to try first
Quilting cotton Size 80/12 universal Straight, 2.5 mm length
Jersey knit Size 75/11 ballpoint Narrow zigzag or stretch stitch
Denim Size 90/14 denim Straight, 3.0 mm length

Always test on a scrap of the same fabric layered the way your project will be. Adjust one setting at a time so you can see what changed.

Adjust Tension Only When Needed

Many stitch problems are caused by thread, needle or fabric rather than tension. Before touching the tension dial, check that the needle is not bent, that the thread is not tangled on the spool, and that the bobbin is seated correctly. If the top stitches look loose on the underside, raise the upper tension slightly and test again.

Common Mistakes

  • Inserting the needle backward, which causes skipped stitches and shredded thread.
  • Forgetting to raise the presser foot before rethreading, which prevents the tension discs from opening.
  • Using a dull or bent needle on knits, leading to holes and runs.
  • Sewing with the bobbin wound unevenly, which produces erratic tension.
  • Changing several settings at once, which makes it hard to tell what fixed the problem.
  • A Singer Universal Sewing Machine Needle Assortment lets you match needle size to fabric without guessing. View on Amazon
  • A Brother bobbin set made for Brother machines helps keep bobbin tension consistent from one bobbin to the next. View on Amazon
  • A Fiskars rotary cutter gives clean edges for straight seams and quilting cuts. View on Amazon

FAQ

Does the brother xs2100 computerized sewing machine have an automatic needle threader?

Yes, many models in this class include an automatic needle threader that you engage with a lever at the front. Check your manual for the exact location, as the mechanism varies slightly between models.

What needle should I use for a beginner project?

A size 80/12 universal needle covers most woven cottons and light blends. Switch to a ballpoint needle for knits and a denim needle for heavier fabrics.

Why are my stitches skipping?

Skipped stitches are most often caused by a bent or incorrectly inserted needle, or by using the wrong needle type for the fabric. Replace the needle first before changing any other settings.

Conclusion

Setting up the brother xs2100 computerized sewing machine comes down to correct needle insertion, careful threading and testing on scrap fabric before every project. Match your needle and stitch to the fabric, and change one setting at a time when troubleshooting. With those habits in place, your seams will improve quickly.

Emily Parker

About Emily Parker

Emily Parker is part of our editorial team and reviews and edits our sewing supplies guides, checking product details against manufacturer specifications and owner feedback.

About the author

Emily Parker
Emily Parker

Emily Parker writes reviews and buying guides for Sewing Thread Online.