Brother Xr1355 Computerized 130-stitch Sewing & Quilting Machine: A Practical Guide (2026)
Learn how to set up, thread and use the brother xr1355 computerized 130-stitch sewing & quilting machine, with stitch selection and beginner tips.
Updated November 2026
The brother xr1355 computerized 130-stitch sewing & quilting machine is a capable, feature-rich machine that becomes much easier to use once you understand its setup routine and stitch selection system. This guide walks you through unboxing and threading, choosing stitches for common projects, and avoiding the errors that frustrate new owners. By the end, you should be able to sew your first clean seam and select the right utility or decorative stitch with confidence.
Set Up the Machine Before Your First Project
Place the machine on a flat, stable surface with clear space on both sides. Attach the extension table if you plan to quilt, since a larger work surface supports heavier fabric. Plug in the foot control, insert the presser foot you intend to use, and raise the presser foot before threading.
Shopping for one? See our guide: 5 Best Brother Computerized 140 Stitch Sewing and Quilting Machine Picks.
Thread the Upper Thread Correctly
- Raise the needle to its highest position using the handwheel.
- Place the spool on the spool pin with the thread unwinding in the direction the machine’s diagram indicates.
- Follow the numbered threading guides in order, pulling the thread firmly through the take-up lever.
- Thread the needle from front to back, leaving a tail of about 3 to 4 inches.
Wind and Insert the Bobbin
Wind the bobbin through its own guide path with the thread pulled slightly taut, then seat it in the bobbin case so the thread feeds in the correct direction. Pull the thread through the bobbin case slot and check that the bobbin spins smoothly when you release the tail.
Choose the Right Stitch for Your Fabric and Project
The 130 built-in stitches fall into utility, stretch, decorative and quilting categories. Match the stitch to the job rather than trying every option on a single sample.
| Project type | Suggested stitch category | Typical setting note |
|---|---|---|
| Straight seams on woven cotton | Straight stitch | Use a stitch length around 2.5 mm |
| Knit and stretch fabrics | Stretch or zigzag stitch | Choose a stretch stitch so seams flex |
| Quilt piecing and topstitching | Straight stitch, 1/4 inch seam foot | Keep stitch length consistent |
| Decorative edges and appliqué | Decorative stitches | Test on scrap fabric first |
Test, Adjust and Sew Your First Seam
Before cutting into your project, sew a test sample using two layers of the fabric you plan to use. Pull gently on the seam and check for puckering, loose loops or skipped stitches. Adjust the upper tension dial in small increments if the top thread shows on the underside, or the bobbin thread shows on the top.
Recommended gear
- Quarter-inch seam presser foot: keeps piecing seams accurate for quilt blocks. View on Amazon
- Universal sewing machine needles in assorted sizes: helps you match needle size to fabric weight. View on Amazon
- Extension table for sewing machines: supports large quilts and reduces strain on the fabric. View on Amazon
Common Mistakes and Tips
- Forgetting to raise the presser foot before threading, which prevents the tension discs from engaging.
- Using a dull or mismatched needle, which causes skipped stitches and thread breakage.
- Changing tension settings drastically instead of making small adjustments.
- Skipping a test sample on new fabric, leading to puckered seams in finished work.
- Leaving lint in the bobbin area, which can affect stitch quality over time.
For more background on related Brother models and setup routines, see Brother XR1355 Computerized Sewing Machine: A Setup and Stitching Guide and Brother Computerized Sewing and Quilting Machine Xr1355: A Practical Guide (2026).
FAQ
Is the brother xr1355 computerized 130-stitch sewing & quilting machine good for beginners?
Yes, its built-in stitch selection and guided threading make it approachable for beginners. Practicing on scrap fabric for a few sessions will build confidence quickly.
Which presser foot should I use for quilting?
A quarter-inch seam foot is commonly recommended for piecing, since it helps keep seam allowances consistent. Use a walking foot for layered quilt sandwiches if your machine supports one.
Why are my stitches skipping?
Skipped stitches are most often caused by a dull or incorrect needle, improper threading, or a bent needle. Replace the needle with one suited to your fabric and rethread the machine with the presser foot raised.
Conclusion
With the machine threaded correctly and a few test seams completed, you can move confidently between utility and decorative stitches. Match your stitch, needle and presser foot to each fabric, and keep a scrap sample nearby for quick checks. Consistent setup habits will give you cleaner results across every project.
Related reading
- Brother Xr3340 Computerized Sewing and Quilting Machine: A Practical Guide (2026)
- Brother XR9550 Computerized Sewing and Quilting Machine Details: Specs and Setup
Ready to choose one?
